PSA 2mil Gloss White Cast Vinyl Gray Adhesive w/Air Release Liner is for Solvent Printers; it is compatible with both OEM Solvent and Mild Solvent Inks. This premium high performance, flexible cast vinyl is ideal for irregular surfaces such are recreational vehicle, fleet, marine, automotive and architectural signage. The textured liner has embossed pattern that produces channels in the adhesive that will help air to escape during application. The repositionable adhesive is gray which increases opacity and blockout.

Properties of PSA 2mil Gloss White Cast Vinyl Gray Adhesive w/Air Release Liner

  • Wound: Print Side Out
  • Adhesive: Repositionable Permanent Gray Acrylic
  • Film: 2 mil Cast Vinyl
  • Liner: 90 lb Polycoated two sides air release liner
  • Finish: Gloss White
  • Gloss Level: >80 (avg.) @ 60°
Performance Values
The following information on physical and chemical characteristics is based upon tests believed to be reliable. The values are intended only as a source of information. They are given without guarantee and do not constitute a warranty. The purchaser should independently determine, prior to use, the suitability of this material for his/her specific purpose. (Data represents averages and is not intended for use as a specification.)
  • Durability: 7 years – Vertical Exposure – Unprinted
  • Min. Application Temperature: + 55°F (Min for Substrate)
  • Service Temperature Range: -50°F to + 225°:
  • Dimensional Stability: .01 in. (48 hrs @ 150°F) (applied to aluminum panel)
  • Chemical Resistance: Resistant to alkalies, mild acids, most petroleum based oils, grease and aliphatic solvent and salts
  • Typlcal Adhesiion Values: 180° Peel Test [Stainless Steel (Substrate) 1.9lb/in (24 hours)]
  • Shelf Life: 12mo from ship date when store in proper conditions 70°F and 50% relative humidity

Warranty: 90 Days