The scrim-reinforced vinyl is designed to create cost-effective graphics. It is especially great for jobs when economy and quality is needed. True blockout scrim banner for outdoor graphics. Printed side does not show through. For best results use pigmented inks.
Material: Tear-resistant polyester fabric embedded between two white vinyl layers
Caliper/Gauge: 15 mil
Weight: 445 g/m2
Gloss (@60°): 2 (avg.)
Printer/Ink Compatibility -Ink saturation of this product is 250% and heavy coated paper setting in most RIPs is appropriate. Pigmented-based inks enhance both water and ultraviolet resistance levels. Dye based inks, while maintaining excellent vibrancy, show a slightly lower ultraviolet resistance. Over saturation with dye based inks may result in image degradation. Product can be printed on Encad, ColorSpan, Hewlett-Packard, Mimaki, Roland and Epson series dye & pigment-based inks
Ink Dry Time – Varies with type and amount of ink, relative humidity and temperature
Printing: 60-80°F, 50% Relative Humidity
Ideal Storage Conditions: 70°F,50% Relative Humidity, store in original packaging.
Handling Requirements: Due to the absorptive nature of the coating, avoid touching the coated surface with bare skin. Always wear cotton gloves when handling inkjet coated materials. Rolls are supplied with the coated surface wound out. When rolling graphics, always roll so that the thinner material is on the outside of roll.
Life Exectancy: Outdoor – up to 1 year without lamination with pigmented inks
Shelf Life: 1 year from ship date when stored in proper conditions.
Finishing/Lamination – A pressure sensitive vinyl laminate is required, to give surface protection from dirt and abrasion. Thermal laminates should not be used. Before lamination, please allow image to dry for 24 hours.
Warranty: 90 days
Lamination King PO Box 1029 Englewood, FL 34295-1029