True blockout scrim banner for outdoor graphics. Printed side does not show through. For best results use pigmented inks.
Part Number: KJWPB1002
Material: Blackout Scrim Banner
Caliper/Gauge: 15.4 mil
Gloss (@60°): 2.6 (avg.)
Printer/Ink Compatibility -Ink saturation of this product is 250% and heavy coated paper setting in most RIPs is appropriate. Pigmented-based inks enhance both water and ultraviolet resistance levels. Dye based inks, while maintaining excellent vibrancy, show a slightly lower ultraviolet resistance. Over saturation with dye based inks may result in image degradation. Product can be printed on Encad/Kodak (pigmented inks only), Hewlett- Packard DesignJet (2xxx/3xxx/5xxx), ColorSpan Displaymaker (pigmented ink only,) Epson Stylus Pro (7xxx/9xxx), Mimaki JV4 (pigmented inks only) and Roland Hi-Fi Jet (pigmented inks only).
Ink Dry Time – Varies with type and amount of ink, relative humidity and temperature
Printing: 60-80°F, 50% Relative Humidity
Ideal Storage Conditions: 70°F,50% Relative Humidity, store in original packaging.
Handling Requirements: Due to the absorptive nature of the coating, avoid touching the coated surface with bare skin. Always wear cotton gloves when handling inkjet coated materials. Rolls are supplied with the coated surface wound out. When rolling graphics, always roll so that the thinner material is on the outside of roll.
Life Exectancy: Outdoor – up to 6 months without lamination with pigmented inks.
Shelf Life: 6 months from ship date when stored in proper conditions.
Finishing/Lamination – A pressure sensitive vinyl laminate is recommended, to give surface protection from dirt and abrasion. Thermal laminates should not be used. Before lamination, please allow image to dry for 24 hours.
Lamination King PO Box 1029 Englewood, FL 34295-1029