The water-proff 11mil Tyvek Banner is 100% recyclable material ideal for banners, graphics, posters, and displays. It can be used either indoors or outdoors and has the light weigh, high strength qualities of Tyvek. For best results, use pigmented inks.
Part Number: KJWPTYVEK
Material: HDPE – 100% Recyclable
Caliper/Gauge: 11 mil
Weight: 140 g/m2
Gloss (@60°): 2 (avg.)
Printer/Ink Compatibility -Ink saturation of this product is 250% and heavy coated paper setting in most RIPs is appropriate. Pigmented-based inks enhance both water and ultraviolet resistance levels. Dye based inks, while maintaining excellent vibrancy, show a slightly lower ultraviolet resistance. Over saturation with dye based inks may result in image degradation. Product can be printed on Encad, ColorSpan, Hewlett-Packard, Mimaki, Roland and Epson series dye & pigment-based inks.
Ink Dry Time – Varies with type and amount of ink, relative humidity and temperature
Flame Rating: Class A
Printing: 60-80°F, 50% Relative Humidity
Ideal Storage Conditions: 70°F,50% Relative Humidity, store in original packaging.
Handling Requirements: Due to the absorptive nature of the coating, avoid touching the coated surface with bare skin. Always wear cotton gloves when handling inkjet coated materials. Rolls are supplied with the coated surface wound out. When rolling graphics, always roll so that the thinner material is on the outside of roll.
Life Exectancy: Outdoor – up to 1 year without lamination with pigmented inks
Shelf Life: 1 year from ship date when stored in proper conditions.
Finishing/Lamination – A pressure sensitive vinyl laminate is required, to give surface protection from dirt and abrasion. Thermal laminates should not be used. Before lamination, please allow image to dry for 24 hours.
Warranty: 90 days
Lamination King PO Box 1029 Englewood, FL 34295-1029